New 2024 FordF550 XL Dump Truck

"Body TypeDump TruckBody Line184UBody Model9' 184UBody MaterialSteelBody Length9'Body ColorBlackCab Shield Height24""Lighting TypeLEDLighting DescriptionAll LightsHas Mud FlapsYesSide DescriptionFold Down SidesSide Height18""Tailgate DescriptionDouble-Acting Tailgate with Quick Release HardwareSide DescriptionBoards - Both SidesSide Height6""Hoist ModelGS615Hoist TypeElectric/HydraulicHoist DescriptionScissor HoistHoist StyleDouble ActingHitch Description2-5/16"" Pintle Ball Combo 20K with D-RingsTrailer Plug Type7-Pin FlatTarp DescriptionPull Rope Tarp with Back Bar, Rear Hooks and Mesh TarpToolbox TypeUnder BodyToolbox Quantity2Toolbox MaterialSteelToolbox Height18""Toolbox Length36""Toolbox Depth18""Camera DescriptionFactory Backup CameraAlarm TypeBack UpMud Flaps DescriptionMud Flaps184U FeaturesThis body is available in lengths of 8' to 11' in 1' increments. Inside width from side to side is 84"".Features:SIDES: One piece sides with no welded seams. 10 gauge A607 grade-50 high tensile steel with boxed top rail and fully welded boxed rear corner post. 6"" side board gussets with full length rub rails, and box-type sidebraces.RUB RAILS: Full length 45 degree deflector panels are an integral part of the sides.FLOOR: 10 gauge two-piece high tensile steel floor with 2"" floor to side radius. A607 grade-50 steel.FRONT WALL: 10 gauge high tensile A607 grade 50 steel. Full width integral inverted V-type horizontal bracing.TAILGATE: 3 Panel fully boxed 10 gauge high tensile A607 grade 50 steel with boxed horizontal reinforcements and sloping lower deflector. Tailgate is 6"" higher than side.TAILGATE HARDWARE: Heavy duty: Standard upper hardware is offset cast steel hinge. Lower hook is cast steel: engages tailgate pin from top. Banjo eye keeps tailgate chain in position you select.LIGHTS & REFLECTORS: FMVSS 108 lights are standard, recessed for protection, rubber mounted and shock proof.UNDERSTRUCTURE: Completely jig built with 3"" structural channel crossmembers on 12"" centers and 5"" structural channel longitudinal. Crossmembers are gusseted and welded to longitudinals.POPULAR OPTIONS: 36"" cab shield, 8 gauge sides, 3/16"" one piece floor, fold down 13"" sides, 18"" sides, quick release upper hardware, other options available"